Descaler

Fill: 75g

Directions for use

• Half fill kettle with water and bring to the boil.
• Unplug kettle and stand it in the sink.
• Slowly add the contents of the sachet and leave for at least 30 minutes.
• If any scale remains, re-heat the solution until it starts to fizz, but do not boil.
• Empty the contents of the kettle and rinse with plenty of cold water. Fill and boil, then empty and rinse again.

• Always follow manufacturer's instructions.
• Half fill the reservoir with cold water and add 25g of Punch Descaler. Stir well using a plastic or wooden utensil.
• Boil through about half of the solution.
• Switch off and leave for at least 2 hours.
• Repeat for stubborn stains.
• Buff to a shine with a soft dry cloth.
• This product is not suitable for use on lacquered surfaces.

• Always follow manufacturer's instructions.

<< Back to previous page